Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for DVD)

DTC    58-43    SPD Signal Error

DTC    80-43    SPD Signal Error

for Preparation Click here


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
58-43
A difference between the GPS speed and SPD pulse is detected.
  1. Speed signal circuit
  2. Navigation receiver assembly
80-43
A difference between the GPS speed and SPD pulse is detected.

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs (Click here).

1.CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)


    E120089
  1. Enter the "Navigation Check" mode and select "Vehicle Sensors" (Click here).

  1. While driving the vehicle, compare the "SPD" indicator to the reading on the speedometer. Check if these readings are equal or almost equal.

    OK:
    The readings are equal or almost equal.



NG
GO TO "Speed Signal Circuit" (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)