CRUISE CONTROL SYSTEM > DATA LIST / ACTIVE TEST |
| READ DATA LIST |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Read the Data List according to the display on the tester.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Vehicle Spd | Vehicle speed / min.: 0 km/h (0 mph) max.: 255 km/h (158 mph) | Actual vehicle speed | - |
| Memory Spd | Vehicle speed / min.: 0 km/h (0 mph) max.: 200 km/h (125 mph) | Actual vehicle speed stored in memory | - |
| Cruise control | Cruise control / ON or OFF | ON: Cruise control is SET OFF: Cruise control is UNSET | - |
| Main SW (Main) | Main switch (Main CPU) / ON or OFF | ON: Main switch (Main CPU) is SET OFF: Main switch (Main CPU) is UNSET | - |
| CCS Relay M | Switch ready (Main CPU) / ON or OFF | ON: Switch ready (Main CPU) is SET OFF: Switch ready (Main CPU) is UNSET | - |
| CCS Indicator M | Switch indicator (Main CPU) / ON or OFF | ON: Switch indicator (Main CPU) is SET OFF: Switch indicator (Main CPU) is UNSET | - |
| Cancel SW | CANCEL switch / ON or OFF | ON: CANCEL switch is SET OFF: CANCEL switch is UNSET | - |
| SET/COAST SW | - / SET switch / ON or OFF | ON: - / SET switch is SET OFF: - / SET switch is UNSET | - |
| RES/ACC SW | + / RES switch / ON or OFF | ON: + / RES switch is SET OFF: + / RES switch is UNSET | - |
| Stp Light SW M | Stop light SW signal (Main CPU) / ON or OFF | ON: Brake pedal depressed OFF: Brake pedal released | - |
| Shift D Pos* | Shift D position / ON or OFF | ON: Shift lever is in D position OFF: Shift lever is not in D position | - |