Home › ENGINE ยท 2AD-FHV › FUEL › FUEL TANK

FUEL TANK > DISASSEMBLY

for Preparation Click here



1. REMOVE FUEL EMISSION HOSE


    A127856
  1. Disconnect the fuel emission hose.



2. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY


    A209413
  1. Remove the tube joint clip and pull out the fuel tank main tube.

    NOTICE:
    1. Before removing a tube joint clip, check for foreign matter around the clip. Clean if necessary.
    2. Do not use any tools in this procedure.
    3. Do not forcefully bend or twist the tube.
    4. Put the tube in a plastic bag to prevent damage and contamination.
    5. If the fuel suction vent tube and tube are stuck together, pinch the tube and turn it carefully to disconnect it.
    6. Be careful not the damage any clips. If a clip is damaged, replace it.



3. DISCONNECT FUEL TANK RETURN TUBE


    A209414
  1. Remove the tube joint clip and pull out the fuel tank return tube.

    NOTICE:
    1. Before removing a tube joint clip, check for foreign matter around the clip. Clean if necessary.
    2. Do not use any tools in this procedure.
    3. Do not forcefully bend or twist the tube.
    4. Put the tube in a plastic bag to prevent damage and contamination.
    5. If the fuel suction vent tube and tube are stuck together, pinch the tube and turn it carefully to disconnect it.
    6. Be careful not the damage any clips. If a clip is damaged, replace it.



4. REMOVE FUEL TANK VENT TUBE SET PLATE


    A125359
  1. Remove the 8 bolts and set plate.



5. REMOVE FUEL SUCTION VENT TUBE ASSEMBLY


    A125360
  1. Disconnect the fuel hose and remove the suction vent tube assembly.

    NOTICE:
    Do not damage the suction vent tube assembly.

  1. Remove the gasket from the suction vent tube assembly.



6. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY


    A125367
  1. Remove the fuel tank main tube from the fuel tube clamp.



7. REMOVE FUEL TANK RETURN TUBE
  1. Remove the return tube from the fuel tube clamp.



8. REMOVE NO. 1 FUEL TUBE CLAMP
  1. Remove the 4 fuel tube clamps from the fuel tank.



9. REMOVE NO. 1 FUEL TANK CUSHION


    A124667
  1. Remove the 7 fuel tank cushions from the fuel tank.



10. REMOVE FUEL SENDER GAUGE ASSEMBLY


    A124670
  1. Remove the 5 screws and sender gauge.