FUEL TANK > REASSEMBLY |
| 1. INSTALL FUEL SENDER GAUGE ASSEMBLY |
![]() |
Install the sender gauge with the 5 screws.
| 2. INSTALL NO. 1 FUEL TANK CUSHION |
![]() |
Install 7 new fuel tank cushions onto the fuel tank as shown in the illustration.
| 3. INSTALL NO. 1 FUEL TUBE CLAMP |
![]() |
Install the 4 fuel tube clamps to the fuel tank.
| 4. INSTALL FUEL TANK RETURN TUBE |
Install the return tube to the fuel tube clamps
| 5. INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY |
Install the main tube to the fuel tube clamps.
| 6. INSTALL FUEL SUCTION VENT TUBE ASSEMBLY |
![]() |
Install a new gasket onto the suction vent tube assembly.
Connect the fuel hose and install the suction vent tube assembly into the fuel tank.
| 7. INSTALL FUEL TANK VENT TUBE SET PLATE |
![]() |
Install the set plate with the 8 bolts.
| 8. CONNECT FUEL TANK RETURN TUBE |
![]() |
Push the fuel tube joint into the plug of the fuel suction vent tube, and then install the tube joint clip.
| 9. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY |
![]() |
Push the fuel tube joint into the plug of the fuel suction vent tube, and then install the tube joint clip.
| 10. INSTALL FUEL EMISSION HOSE |
![]() |
Connect the fuel emission hose.