Home › ENGINE ยท 2AD-FTV › ENGINE CONTROL SYSTEM › CAMSHAFT POSITION SENSOR

CAMSHAFT POSITION SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL CAMSHAFT POSITION SENSOR


    A124879
  1. Apply a light coat of engine oil to the O-ring of the sensor.



    A205276
  1. Install the sensor with the bolt.

    Torque:
    8.8 N*m{ 90 kgf*cm , 78 in.*lbf }

  1. Connect the sensor connector.



2. INSTALL RADIATOR RESERVOIR BRACKET


    A124931
  1. Install the bracket with the bolt.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }



3. INSTALL RADIATOR RESERVOIR ASSEMBLY


    A124930
  1. Install the reservoir with the 2 bolts.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }



4. INSTALL NO. 1 ENGINE COVER


    A203808
  1. Attach the 4 clips to install the engine cover.