LIGHTING SYSTEM > SYSTEM DESCRIPTION |
| LIGHTING SYSTEM |
Illumination control system (Illuminated entry system):
When the doors are unlocked through a key or transmitter operation, or when a door is opened or closed, the illuminated entry system turns on the room light, map light, ignition key cylinder light*1 or transponder key amplifier*2 and foot light.
The main body ECU receives the following signal (A).
The main body ECU controls the following signal based on the signals listed in A.
The main body ECU controls the on/off and fade-in/fade-out operation of the following parts.
Battery saver system:
When the ignition switch is turned off and any of the doors is open continuously for 20 minutes, the main body ECU turns the illumination operation signal off. As a result, the room light, the map light and the foot light turn off.
The main body ECU receives the following signals (B).
The main body ECU controls the following signal based on the signals listed in B (C).
The main body ECU controls the illumination period of the following parts based on the signals listed in C.
Manual light control system:
This system functions when lights such as the headlights and taillights are illuminated through manual operation of the light control switch.
The main body ECU receives the following signals (D).
The main body ECU controls the following signals based on the signals listed in D (E).
The main body ECU controls the on/off operation of the following parts based on the signals listed in E.
Light auto turn off system (for Long Body):
With the light control switch in the TAIL or HEAD position, turning the ignition switch off and opening the driver side door automatically turns off the taillights or headlights.
Light auto turn off system (for Short Body):
According to the position of the light control switch, the appropriate lights automatically turn off.
The main body ECU receives the following items (F).
The main body ECU controls the following signals based on the items listed in F (G).
The main body ECU controls the illumination period of the following parts based on the signals listed in G.
Automatic light control system:
When the automatic light control sensor is ON while the vehicle is being driven and the light control switch is in the AUTO position, the headlights and taillights automatically illuminate. When this system is operating with the lights ON, turning the ignition switch off and opening the driver's door turns off the lights.
The main body ECU receives the following signals (H).
The main body ECU controls the following signals based on the signals listed in H (I).
The main body ECU controls the illumination period of the following parts based on the signals listed in I.
Daytime running light system:
This system is directly connected to the low-beam headlights and taillight is designed to automatically activate the daytime running lights in order to increase the visibility of the vehicle.
The main body ECU receives the following items (J).
The main body ECU controls the following signals based on the items listed in J.
The main body ECU controls the on/off operation of the following parts.