Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR OUTLET CONTROL SERVO MOTOR (for Automatic Air Conditioning System)

AIR OUTLET CONTROL SERVO MOTOR (for Automatic Air Conditioning System) > INSPECTION

for Preparation Click here



1. INSPECT AIR OUTLET CONTROL SERVO MOTOR


    E125450E01
  1. Inspect the servo motor operation.



      E125445
    1. Connect the positive (+) lead from the battery to terminal 4 and negative (-) lead to terminal 5, and then check that the lever turns to the "FACE" position smoothly.

    2. Connect the positive (+) lead from the battery to terminal 5 and negative (-) lead to terminal 4, and then check that the lever turns to the "DEF" position smoothly.
      If the operation is not as specified, replace the air outlet control servo motor.