Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR OUTLET CONTROL SERVO MOTOR (for Automatic Air Conditioning System)

AIR OUTLET CONTROL SERVO MOTOR (for Automatic Air Conditioning System) > REMOVAL

for Preparation Click here



1. REMOVE AIR CONDITIONING UNIT ASSEMBLY
  1. Remove the air conditioning unit assembly .



2. REMOVE AIR OUTLET CONTROL SERVO MOTOR


    E127171
  1. Remove the 3 screws.

  1. Detach the evaporator case from the blower case.



    E124277
  1. Remove the 3 screws and disconnect the connector.

  1. Remove the air outlet control servo motor.