Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR MIX CONTROL SERVO MOTOR (for Automatic Air Conditioning System)

AIR MIX CONTROL SERVO MOTOR (for Automatic Air Conditioning System) > INSPECTION

for Preparation Click here



1. INSPECT AIR MIX CONTROL SERVO MOTOR


    E125446E01
  1. Inspect the servo motor operation.



      E125447
    1. Connect the positive (+) lead from the battery to terminal 4 and negative (-) lead to terminal 5, and then check that the lever turns to the "MAX HOT" position smoothly.

    2. Connect the positive (+) lead from the battery to terminal 5 and negative (-) lead to terminal 4, and then check that the lever turns to the "MAX COOL" position smoothly.
      If the operation is not as specified, replace the air mix control servo motor.