SIDE AIRBAG SENSOR > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT DOOR SCUFF PLATE LH |
![]() |
Using a screwdriver, detach the 10 claws and remove the scuff plate.
| 3. REMOVE REAR DOOR SCUFF PLATE LH (for Short Body) |
![]() |
Attach the 8 claws to install the scuff plate.
| 4. REMOVE REAR DOOR SCUFF PLATE LH (for Long Body) |
| 5. REMOVE CENTER PILLAR GARNISH LOWER LH |
![]() |
Remove the lap belt outer anchor cover.
Remove the anchor's built-in bolt from the pillar and disconnect the outer belt.
![]() |
Using a screwdriver, detach the 2 claws.
Using a clip remover, detach the 2 clips and remove the garnish.
| 6. REMOVE SIDE AIRBAG SENSOR ASSEMBLY LH |
![]() |
Disconnect the connector.
Remove the bolt and sensor.