Home › BRAKE › BRAKE CONTROL › ANTI-LOCK BRAKE SYSTEM

DTC    U0073/94    Control Module Communication Bus OFF

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
U0073/94
When either condition below is met:
  1. With terminal IG1 10 V or more, data output from skid control ECU is completed, and output continues for 5 seconds or more
  2. With terminal IG1 10 V or more, bus off condition occurs one time or more within 100 msec., and this occurs 10 times in a row.
CAN communication system

INSPECTION PROCEDURE

1.RECONFIRM DTC
  1. Clear the DTC (Click here).

  1. Check if the same DTC is output (Click here).
    Result 
    Result
    Proceed to
    DTC is output
    A
    DTC is not output
    B



B
USE SIMULATION METHOD TO CHECK (Click here)
A

GO TO CAN COMMUNICATION SYSTEM (Click here)