AIR CONDITIONING SYSTEM (for Manual Air Conditioning System) > DIAGNOSIS SYSTEM |
| DESCRIPTION |
Air conditioning system data and the Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform troubleshooting.
| CHECK DLC3 |
![]() |
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
| 7 (SIL) - 5(SG) | Bus "+" line | During transmission | Pulse generation |
| 4 (CG) - Body ground | Chassis ground | Always | Below 1 Ω |
| 5 (SG) - Body ground | Signal ground | Always | Below 1 Ω |
| 16 (BAT) - Body ground | Battery positive | Always | 11 to 14 V |
| 6 (CANH) - 14 (CANL) | HIGH-level CAN bus line | Ignition switch off* | 54 to 69 Ω |
| 6 (CANH) - 4 (CG) | HIGH-level CAN bus line | Ignition switch off* | 200 Ω or higher |
| 6 (CANH) - 16 (BAT) | HIGH-level CAN bus line | Ignition switch off* | 6 MΩ or higher |
| 14 (CANL) - 4 (CG) | LOW-level CAN bus line | Ignition switch off* | 200 Ω or higher |
| 14 (CANL) - 16 (BAT) | LOW-level CAN bus line | Ignition switch off* | 6 MΩ or higher |