Home › BODY › EXTERIOR › FENDER PANEL MUDGUARD

FENDER PANEL MUDGUARD > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. INSTALL FRONT FENDER MUDGUARD LH


    B127974
  1. Install the mudguard with the 4 screws.



2. INSTALL REAR QUARTER PANEL MUDGUARD LH


    B127976
  1. w/o Outside Moulding:
    Install the mudguard with the 4 screws.



    B127975
  1. w/ Outside Moulding:
    Install the mudguard with the 3 screws.