FOG LIGHT ASSEMBLY > REMOVAL |
| 1. REMOVE RADIATOR SUPPORT OPENING COVER |
![]() |
Remove the 9 clips and radiator support opening cover.
| 2. REMOVE HOOD CENTER CUSHION |
![]() |
Using a clip remover, remove the center hood cushion.
| 3. REMOVE RADIATOR GRILLE PROTECTOR |
![]() |
Remove the 2 radiator grille protectors.
| 4. REMOVE FRONT FENDER FRONT SPLASH SHIELD LH |
![]() |
Remove the screw, bolt, nut and splash shield.
| 5. REMOVE FRONT FENDER FRONT SPLASH SHIELD RH |
| 6. REMOVE FRONT BUMPER COVER |
![]() |
Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.
Remove the retainer.
![]() |
Put protective tape around the bumper cover.
Using a clip remover, remove the 4 clips.
Remove the 8 screws.
![]() |
Detach the 4 claws and remove the bumper cover.
Disconnect the 2 fog light connectors.
| 7. REMOVE FOG LIGHT ASSEMBLY LH |
![]() |
Remove the screw.
Detach the 2 guides and remove the fog light.