REAR WIPER RUBBER > REMOVAL |
| 1. REMOVE REAR WIPER BLADE ASSEMBLY |
![]() |
Rotate and remove the cap as described in the "REMOVE" procedures.
Raise the arm and blade.
![]() |
Raise the wiper blade to the position where the claw detach with a ''click'' sound, as shown in the illustration.
![]() |
Pull the wiper blade straight toward the left side of the vehicle to remove it from the wiper arm.
| 2. REMOVE REAR WIPER RUBBER |
![]() |
Lift and pull the end of the wiper rubber protruding from the blade stopper as shown in the illustration.