FRONT BRAKE FLEXIBLE HOSE > REMOVAL |
| 1. REMOVE FRONT WHEEL |
| 2. DRAIN BRAKE FLUID |
| 3. REMOVE FRONT FLEXIBLE HOSE |
![]() |
Disconnect the brake tube (labeled A) from the flexible hose with union nut wrench while holding the flexible hose with a wrench.
Remove the clip (labeled B).
Remove the 2 bolts (labeled C, D) and then remove the flexible hose clamp (labeled E) from the knuckle.
![]() |
Remove the sensor clamp and flexible hose clamp from the flexible hose bracket.
![]() |
Remove the union bolt and gasket, and then remove the flexible hose from the disc brake cylinder.