Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING PANEL (for Automatic Air Conditioning System)

AIR CONDITIONING PANEL (for Automatic Air Conditioning System) > INSTALLATION

for Preparation Click here



1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    E118690
  1. Connect the connectors.

  1. Attach the 3 clips to install the air conditioning control.

  1. Install the 2 screws.



2. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System for HDD)
  1. Connect all connectors to install the navigation receiver.

  1. Insert the navigation receiver to attach the 2 claws and 4 clips on its backside.



  1. Install the 4 bolts.

    Torque:
    12.8 N*m{ 130 kgf*cm , 9 ft.*lbf }



    B219744



3. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System for DVD)


  1. for 2AD-FTV, 2AD-FHV:

    1. Connect all the connectors to install the navigation receiver.

    2. Insert the navigation receiver to attach the 2 claws and 4 clips on its backside.



    3. Install the 4 bolts.

      Torque:
      12.8 N*m{ 130 kgf*cm , 9 ft.*lbf }



      B220641



  1. except 2AD-FTV, 2AD-FHV:

    1. Connect all the connectors to install the navigation receiver.

    2. Insert the navigation receiver to attach the 2 claws and 4 clips on its backside.



    3. Install the 4 bolts.

      Torque:
      12.8 N*m{ 130 kgf*cm , 9 ft.*lbf }



      B219744



4. INSTALL STEREO OPENING COVER (w/o Radio Receiver)


B133002
  1. Attach the 4 clips to install the stereo opening cover.

  1. Install the 4 bolts.



5. INSTALL RADIO RECEIVER (w/ Radio Receiver)


  1. w/o Stereo Opening Cover:

    1. Connect all the connectors and install the radio receiver.

    2. Insert the radio receiver to attach the 2 claws and 4 clips on its backside.



    3. Install the 4 bolts.

      Torque:
      12.8 N*m{ 130 kgf*cm , 9 ft.*lbf }



      B219615



  1. w/ Stereo Opening Cover:

    1. Connect all the connectors and install the radio receiver.

    2. Insert the radio receiver to attach the 2 claws and 4 clips on its backside.



    3. Install the 4 bolts.

      Torque:
      12.8 N*m{ 130 kgf*cm , 9 ft.*lbf }



      B219616



6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER


B210523
  1. Connect the connector.

  1. Attach the 3 clips and 2 claws to install the cluster finish panel.



7. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER


B210524
  1. Connect the connector.

  1. Attach the 3 clips and 2 claws to install the cluster finish panel.



8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


9. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).