AIR CONDITIONING PANEL (for Automatic Air Conditioning System) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER |
![]() |
Using a moulding remover, detach the 3 clips and 2 claws, and then remove the cluster finish panel.
Disconnect the connector.
| 3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER |
![]() |
Using a moulding remover, detach the 3 clips and 2 claws, and then remove the cluster finish panel.
Disconnect the connector.
| 4. REMOVE RADIO RECEIVER (w/ Radio Receiver) |
w/o Stereo Opening Cover:
Remove the 4 bolts.
Pull the radio receiver to detach the 2 claws and 4 clips on the backside of the radio receiver.

Disconnect all connectors and remove the radio receiver with bracket.
w/ Stereo Opening Cover:
Remove the 4 bolts.
Pull the radio receiver to detach the 2 claws and 4 clips on the backside of the radio receiver.

Disconnect all connectors and remove the radio receiver with bracket.
| 5. REMOVE STEREO OPENING COVER (w/o Radio Receiver) |
![]() |
Remove the 4 bolts.
Detach the 4 clips and remove the stereo opening cover.
| 6. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System for DVD) |
for 2AD-FTV, 2AD-FHV:
Remove the 4 bolts.
Pull the navigation receiver to detach the 2 claws and 4 clips on the backside of the navigation receiver.

Disconnect all the connectors and remove the navigation receiver.
except 2AD-FTV, 2AD-FHV:
Remove the 4 bolts.
Pull the navigation receiver to detach 2 claws and 4 clips on the backside of the navigation receiver.

Disconnect all the connectors and remove the navigation receiver.
| 7. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System for HDD) |
Remove the 4 bolts.
Pull the navigation receiver to detach the 2 claws and 4 clips on the backside of the navigation receiver.

Disconnect all connectors and remove the radio navigation with bracket.
| 8. REMOVE AIR CONDITIONING CONTROL ASSEMBLY |
![]() |
Remove the 2 screws.
Using a screwdriver, detach the 3 clips.
Connect the connectors and remove the air conditioning control.