Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT LEVELING SWITCH

HEADLIGHT LEVELING SWITCH > INSPECTION

for Preparation Click here



1. INSPECT HEADLIGHT LEVELING SWITCH


E114455E05
  1. Connect the positive (+) battery lead to terminal 1 and the negative (-) battery lead to terminal 4.

    Standard voltage:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (+B) - 4 (E)
    2 (T) - 4 (E)
    0
    0.87 to 0.93 V
    1 (+B) - 4 (E)
    2 (T) - 4 (E)
    1
    0.76 to 0.82 V
    1 (+B) - 4 (E)
    2 (T) - 4 (E)
    2
    0.66 to 0.72 V
    1 (+B) - 4 (E)
    2 (T) - 4 (E)
    3
    0.55 to 0.61 V
    1 (+B) - 4 (E)
    2 (T) - 4 (E)
    4
    0.44 to 0.50 V
    1 (+B) - 4 (E)
    2 (T) - 4 (E)
    5
    0.34 to 0.40 V

    If the result is not as specified, replace the headlight leveling switch.

  1. Inspect the switch illumination.

    1. Connect the battery positive (+) lead to terminal 3 (ILL+) and the negative (-) lead to terminal 4(E), then check that the light comes on.

      OK:
      LED comes on.

      If the result is not as specified, replace the light.