Home › BODY › SEAT › FRONT SEAT CUSHION HEATER

FRONT SEAT CUSHION HEATER > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH


    B131372E01
  1. Measure the resistance of the seat cushion heater.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    A1 - B6
    Seat cushion heater temperature 20°C (68°F)
    Below 1 Ω
    A1 - A2
    Seat cushion heater temperature 20°C (68°F)
    Approx. 5.20 Ω

    If the result is not as specified, replace the seat cushion heater assembly.

  1. Heat the thermostat with a light.

  1. Measure the resistance of the seat cushion heater.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    B4 - B6
    Seat heater temperature 20°C (68°F)
    Approx. 4.85 Ω
    B4 - B6
    Seat heater temperature 30°C (86°F)
    Approx. 5.00 Ω
    B4 - B6
    Seat heater temperature 30°C (86°F)
    Approx. 5.15 Ω

    If the result is not as specified, replace the seat cushion heater assembly.



2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH

HINT:
Use the same procedures described for the LH side.