Home › BODY ELECTRICAL › METER › COMBINATION METER

COMBINATION METER > INSTALLATION

for Preparation Click here



1. INSTALL COMBINATION METER ASSEMBLY


B129873
  1. Connect the connector.

  1. Attach the 2 clips to install the combination meter.

  1. Install the 2 screws.



2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


B129872
  1. Attach the 4 clips and 6 claws to install the instrument cluster finish panel.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).