Home › BODY › INSTRUMENT PANEL › LOWER INSTRUMENT PANEL

LOWER INSTRUMENT PANEL > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 3 ANTENNA CORD SUB-ASSEMBLY


    B208371
  1. Attach the 4 wire harness clamps to install the antenna cord.



2. INSTALL NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY (w/ Illumination)


    B209106
  1. Attach the 4 wire harness clamps and rotate the lights in the direction shown in the illustration to install the interior illumination light.



3. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (w/ Illumination)


    B208372
  1. Attach the 2 claws to install the interior illumination light.



4. INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR (for Automatic Air Conditioning System)


    B208370
  1. Attach the 2 claws to install the cooler thermistor.



5. INSTALL INSTRUMENT PANEL SAFETY PAD COVER (w/o Entry and Start System)


    B219392
  1. Attach the 4 claws to install the instrument panel safety pad cover.



6. INSTALL INSTRUMENT PANEL SAFETY PAD COVER (w/ Entry and Start System)


    B210295
  1. Attach the 4 claws to install the instrument panel safety pad cover.



7. INSTALL FUSE BOX OPENING COVER


    B208368
  1. Attach the 2 claws and 2 clips to install the cover.



8. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY