ELECTRONIC POWER STEERING SYSTEM > TERMINALS OF ECU |
| CHECK POWER STEERING ECU |

| Symbols | Wiring Color | Terminal Description |
| U | W | U phase motor output |
| V | B | V phase motor output |
| W | W-R | W phase motor output |
Measure the voltage and resistance of the connectors.
| Symbols (Terminal No.) | Wiring Color | Terminal Description | Condition | Specified Condition |
| PIG (A2-1) - PGND (A2-2) | W-B - W-B*1 L - W-B*2 | Power source | Always | 10 to 14 V |
| IG (E21-5) - PGND (A2-2) | L - W-B | IG power source | Ignition switch on (IG) | 10 to 14 V |
| TRQ1 (h2-6) - TRQG (h2-1) | G - B | Torque sensor signal | Ignition switch on (IG) Steering wheel not turned (without load) | 2.3 to 2.7 V |
| Ignition switch on (IG) Steering wheel turned to right with vehicle stopped | 2.5 to 4.04 V | |||
| Ignition switch on (IG) Steering wheel turned to left with vehicle stopped | 0.95 to 2.5 V | |||
| TRQ2 (h2-2) - TRQG (h2-1) | Y - B | Torque sensor signal | Ignition switch on (IG) Steering wheel not turned (without load) | 2.3 to 2.7 V |
| Ignition switch on (IG) Steering wheel turned to right with vehicle stopped | 0.95 to 2.5 V | |||
| Ignition switch on (IG) Steering wheel turned to left with vehicle stopped | 2.5 to 4.04 V | |||
| TRQF (h2-4) - TRQG (h2-1) | W - B | Torque sensor reference voltage | Ignition switch on (IG) | 3.35 to 3.37 V |
| TRQV (h2-3) - TRQG (h2-1) | R - B | Torque sensor voltage source | Ignition switch on (IG) | 8.5 to 10.5 V |
| TRQG (h2-1) - Body ground | B - Body ground | Torque sensor ground | Always | Below 1 Ω |
| PGND (A2-2) - Body ground | W-B - Body ground | Power ground | Always | Below 1 Ω |
| C1 (h3-1) - PGND (A2-2) | R - W-B | Resolver output signal | Ignition switch on (IG) Steering wheel is turned | 0.68 to 4.42 V |
| C2 (h3-5) - PGND (A2-2) | L - W-B*1 Y - W-B*2 | Resolver output signal | Ignition switch on (IG) Steering wheel is turned | 0.68 to 4.42 V |
| S1 (h3-2) - PGND (A2-2) | B - W-B | Resolver output signal | Ignition switch on (IG) Steering wheel is turned | 0.68 to 4.42 V |
| S2 (h3-6) - PGND (A2-2) | Y - W-B*1 L - W-B*2 | Resolver output signal | Ignition switch on (IG) Steering wheel is turned | 0.68 to 4.42 V |
| R1 (h3-4) - PGND (A2-2) | W - W-B*1 G - W-B*2 | Resolver excitation signal | Ignition switch on (IG) Steering wheel is turned | 2.9 to 5.1 V |
| R2 (h3-8) - PGND (A2-2) | G - W-B*1 W - W-B*2 | Resolver excitation signal | Ignition switch on (IG) Steering wheel is turned | 2.9 to 5.1 V |
| CANH (E21-2) - CANL (E21-8) | Y - W | CAN communication line | Ignition switch off | 54 to 69 Ω |