ENGINE IMMOBILISER SYSTEM (w/o Entry and Start System) > DTC CHECK / CLEAR |
| CHECK DTC |
![]() |
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON and turn the intelligent tester ON.
Select the following menu items: Body / Immobiliser / DTC.
Check DTCs and then write them down.
Confirm the details of the DTCs (Click here).
| CLEAR DTC |
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON (do not start the engine) and turn the intelligent tester ON.
Select the following menu items: Body / Immobiliser / DTC / Clear.
Erase DTCs by pressing the YES button on the tester.