WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System) > SYSTEM DESCRIPTION |
| WIRELESS DOOR CONTROL SYSTEM DESCRIPTION |
This system locks and unlocks the vehicle's doors remotely. The wireless control system has the following features:
| FUNCTION OF MAIN COMPONENTS |
| Components | Functions |
| Door control transmitter |
|
| Door control receiver | Receives weak electric waves (recognition codes and function codes) from door control transmitter, and changes waves to code data |
| Door lock (door lock position switch) | Transmits door lock conditions of each door to main body ECU |
| Unlock warning switch | Detects if key is in ignition key cylinder |
| Front door courtesy light switch Rear door courtesy light switch Back door courtesy light switch | Turns ON when door is open and turns OFF when door is closed. Outputs door status (open or closed) to main body ECU. |
| SYSTEM FUNCTION |
Door lock / unlock function:
Answer-back function:
The wireless door lock control system has the following functions.
| Function | Outline |
| All door lock function | Pressing LOCK switch locks all doors |
| All door unlock function | Pressing UNLOCK switch unlocks all doors |
| Answer-back function | Hazard warning lights flash once when doors are locked, and flash twice when doors are unlocked to indicate that operation has been completed |
| Automatic locking function | If no doors are opened within 30 seconds after being unlocked by wireless transmitter, all doors are locked again automatically |
| Illuminated entry function | If locked doors are unlocked through wireless operation, ignition key cylinder light and room No. 1 light illuminate. If one of following situations occurs, lights fade out:
|
| Security function | Sends signal as rolling code |
| Transmitter recognition code registration function | Enables 4 modes for registering (writing and storing) transmitter recognition codes in EEPROM, built into door control receiver |