Home › BODY ELECTRICAL › DOOR LOCK › TRANSMITTER BATTERY (w/ Entry and Start System)

TRANSMITTER BATTERY (w/ Entry and Start System) > INSTALLATION

for Preparation Click here



1. INSTALL TRANSMITTER BATTERY


    B107853
  1. Install a battery (lithium battery: CR1632) with the positive (+) side facing upward, as shown in the illustration.

    NOTICE:
    1. Do not bend the transmitter battery electrode during insertion.
    2. Keep the transmitter cover interior free of dust and oil.



    B107852
  1. Engage the hook and install the transmitter cover.



    B107850
  1. Insert the emergency key into the transmitter.

  1. After installation, press any of the transmitter switches. Check that the LED illuminates.