Home › ENGINE ยท 2AD-FHV › EXHAUST › EXHAUST PIPE

EXHAUST PIPE > REMOVAL

for Preparation Click here


CAUTION:
  1. Wear protective gloves and protective glasses when removing the exhaust pipe.
  2. The exhaust pipe is extremely hot immediately after the engine has stopped.
  3. Confirm that the exhaust pipe has cooled down before removing it.



1. REMOVE TAILPIPE ASSEMBLY
  1. Remove the 2 bolts and 2 compression springs.

  1. Disconnect the tailpipe from the 2 exhaust pipe supports and remove it.

  1. Remove the gasket.



2. REMOVE AIR FUEL RATIO SENSOR


    A206335
  1. Disconnect the sensor connector.

  1. Remove the wire harness clamp.



    A126973E02
  1. Using SST, remove the air fuel ratio sensor.

    SST
    09224-00010  



3. REMOVE FRONT EXHAUST PIPE ASSEMBLY
  1. Remove the 2 bolts and 2 compression springs.

  1. Disconnect the front exhaust pipe from the 3 exhaust pipe supports and remove it.

  1. Remove the gasket.