YAW RATE AND DECELERATION SENSOR > INSTALLATION |
| 1. INSTALL YAW RATE SENSOR ASSEMBLY (w/ VSC) |
![]() |
Install the yaw rate sensor with the 2 bolts.
Connect the yaw rate sensor connector.
| 2. INSTALL DECELERATION SENSOR (w/o VSC) |
![]() |
Install the deceleration sensor with the 2 bolts.
Connect the deceleration sensor connector.
| 3. INSTALL YAW RATE SENSOR BRACKET |
Install the bracket with the bolt.

| 4. INSTALL FRONT DOOR SCUFF PLATE LH |
![]() |
Attach the 10 claws to install the scuff plate.
| 5. INSTALL FRONT SEAT ASSEMBLY LH |
for Manual Seat:
Install the front seat LH (Click here).
for Power Seat:
Install the front seat LH (Click here).
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 7. PERFORM ZERO POINT CALIBRATION OF YAW RATE AND DECELERATION SENSOR (w/ VSC) |
Perform the yaw rate and deceleration sensor zero point calibration (Click here).
| 8. INSPECT YAW RATE SENSOR SIGNAL (w/ VSC) |
Inspect the yaw rate sensor signal (Click here).
| 9. INSPECT DECELERATION SENSOR SIGNAL (w/o VSC) |
Inspect the deceleration sensor signal (Click here).