Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL RECEIVER (for Short Body)

DOOR CONTROL RECEIVER (for Short Body) > INSTALLATION

for Preparation Click here



1. INSTALL DOOR CONTROL RECEIVER


B132556
  1. Install the receiver with the bolt.

  1. Connect the receiver connector.



2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH


B132555
  1. Attach the 7 clips to install the garnish.



3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH


B129713
  1. Install the belt hanger to the trim board.

  1. Attach the 5 clips and 5 claws to install the trim board.

  1. Install the bolt and 2 screws.



    B137547
  1. Connect the rear No.1 seat belt's floor anchor.

    1. Connect the floor anchor with the bolt.

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    2. Install the anchor cover.



4. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET


B131615E01
  1. Align the bracket positioning hole with the claws and install the bracket with the bolt, 2 washers and collar.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



5. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER


B131613
  1. Attach the 4 claws to install the cover.



6. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL RH


    B135482
  1. Attach the 6 claws to install the bezel.



7. INSTALL REAR FLOOR FINISH PLATE


    B129716
  1. Attach the 6 clips to install the finish plate.



8. INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE


B129717
  1. Attach the 7 clips to install the side plate.

  1. Install the 4 screws.



9. INSTALL JACK CARRIER ASSEMBLY


    B129715
  1. Install the jack carrier with the 7 clips.



10. INSTALL REAR FLOOR NO. 3 BOARD
  1. Install the rear floor No. 3 board.



11. INSTALL REAR FLOOR NO. 2 BOARD
  1. Install the rear floor No. 2 board.



12. INSTALL DECK BOARD ASSEMBLY
  1. Install the deck board.



13. INSTALL REAR FLOOR NO. 1 BOARD
  1. Install the rear floor No. 1 board.



14. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
  1. Install the rear door opening trim weatherstrip.



15. INSTALL REAR DOOR SCUFF PLATE RH


B132554
  1. Attach the 8 screws to install the scuff plate.