DTC B1441/41 Air Mix Damper Control Servo Motor Circuit (Passenger Side) |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1441/41 | Air mix damper position does not change even if air conditioning amplifier operates air mix control servo motor |
|

| 1.READ VALUE USING INTELLIGENT TESTER (AIR MIX PULSE-P) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the intelligent tester main switch ON.
Select the items below in the Data List, and read the value displayed on the intelligent tester.
| Item | Measurement Item / Display (Range) | Normal Condition | Diagnostic Note |
| Air Mix Pulse-P | Passenger side air mix servo motor target pulse / Min.: 0, Max.: 255 | Customized value displayed | - |
| Result | Proceed to |
| NG | A |
| OK (Checking from PROBLEM SYMPTOMS TABLE) | B |
| OK (Checking from DTC) | C |
|
| ||||
|
| ||||
| A | |
| 2.REPLACE AIR MIX CONTROL SERVO MOTOR |
|
| ||||
| OK | ||
| ||