TIRE AND WHEEL SYSTEM > INSPECTION |
| 1. INSPECT TIRE |
Measure the tires for wear and proper inflation pressure.
| Tire Size | Front | Rear |
| 215/70R16 99H 225/65R17 101H 235/55R18 99H | 220 kPa (2.2 kgf/cm2, 32 psi) | 220 kPa (2.2 kgf/cm2, 32 psi) |
| 225/65R17 101H (for Eco Package) | 230 kPa (2.3 kgf/cm2, 33 psi) | 230 kPa (2.3 kgf/cm2, 33 psi) |
![]() |
Using a dial indicator, check the runout of the tires.
| 2. ROTATE TIRE |
![]() |
| 3. INSPECT WHEEL BALANCE |
Check and adjust the off-the car balance.
| 4. CHECK FRONT AXLE HUB BEARING |
![]() |
Inspect the axle hub backlash.
Using a dial indicator, measure the backlash near the center of the axle hub.
Inspect the axle hub deviation.
Using a dial indicator, measure the deviation on the surface of the axle hub.
| 5. CHECK BEARING BACKLASH AND AXLE HUB DEVIATION |
![]() |
Using a dial indicator, measure the backlash near the center of the axle hub.
Using a dial indicator, measure the deviation on the surface of the axle hub outside the hub bolt.