U0129
| When either of following conditions detected;
- 15 seconds have elapsed since engine started and IG voltage 10.5 V or more
- No communication with ABS and traction actuator*1 (skid control ECU) or brake actuator*2 (skid control ECU) continues for 3 seconds or more
(No communication with ECM or ABS and traction actuator*1 (skid control ECU) or brake actuator*2 (skid control ECU) continues for 60 seconds or more)
| - ABS and traction actuator*1 (skid control ECU) or brake actuator*2 (skid control ECU)
- CAN communication system
|