Home › TRANSMISSION ยท U660F AUTOMATIC TRANSAXLE › SHIFT LEVER

SHIFT LEVER > DISASSEMBLY

for Preparation Click here



1. REMOVE LOWER POSITION INDICATOR HOUSING


C202554
  1. Detach the 4 claws and remove the lower position indicator housing from the shift lock control unit.



2. REMOVE POSITION INDICATOR SLIDE COVER
  1. Remove the position indicator slide cover together with the No. 2 position indicator slide cover.

  1. Remove the No. 2 position indicator slide cover from the position indicator slide cover.



3. REMOVE POSITION INDICATOR LIGHT HOUSING


C203385
  1. Detach the 2 claws and remove the position indicator light housing from the floor shift position indicator housing.



4. REMOVE SHIFT LOCK RELEASE BUTTON


C203386
  1. Detach the 2 claws and remove the shift lock release button and spring from the position indicator light housing.



5. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
  1. Disconnect the indicator light wire connector from the position indicator light housing.

  1. Rotate the indicator light wire socket counterclockwise to align the wire with the key part of the position indicator light housing and remove the wire.

  1. Remove the bulb and cap from the indicator light wire socket.