Home › TRANSMISSION ยท U660F AUTOMATIC TRANSAXLE › SHIFT LEVER

SHIFT LEVER > REASSEMBLY

for Preparation Click here



1. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY
  1. Align the wire with the key part of the position indicator light housing, and install the wire. Then rotate the wire clockwise until it locks.

  1. Connect the position indicator light wire connector to the position indicator light housing.



2. INSTALL SHIFT LOCK RELEASE BUTTON
  1. Apply MP grease to the shift lock release button and spring.



    C203387
  1. Install the spring to the shift lock release button, and then install the button together with the spring to the position indicator light housing.



3. INSTALL POSITION INDICATOR LIGHT HOUSING


C203385
  1. Attach the 2 claws to install the position indicator light housing to the shift position indicator housing.



4. INSTALL POSITION INDICATOR SLIDE COVER
  1. Install the No. 2 position indicator slide cover to the position indicator slide cover.

  1. Install the position indicator slide cover together with the No. 2 position indicator slide cover to the lower position indicator housing.



5. INSTALL LOWER POSITION INDICATOR HOUSING


C202554
  1. Attach the 4 claws to install the lower position indicator housing to the shift lock control unit.