DTC C1524/24 Motor Terminal Voltage Malfunction |
DTC C1555/25 Motor Relay Welding Failure |
| DTC No. | DTC Detection Condition | Trouble Area |
| C1524/24 | Short (or open) in motor circuit or abnormal voltage or current in motor circuit |
|
| C1555/25 | Motor relay circuit malfunction |
|

| 1.READ VALUE USING INTELLIGENT TESTER (MOTOR VOLTAGE) |
Connect the intelligent tester to the DLC3.
With the engine running, press the intelligent tester main switch ON.
Select the items "Motor Terminal Volt (U)", "Motor Terminal Volt (V)", "Motor Terminal Volt (W)" in the Data List and read the value displayed on the intelligent tester.
| Tester Display | Measurement Item/Range | Normal Condition | Reference Value |
| Motor Terminal Volt (U) | Motor terminal voltage (U phase): Min.: 0 V Max.: 98 V | Engine running and steering wheel turned | When the steering wheel is turned, a voltage between 1 V and approximately 1 V less than the battery voltage is displayed. |
| Motor Terminal Volt (V) | Motor terminal voltage (V phase): Min.: 0 V Max.: 98 V | Engine running and steering wheel turned | When the steering wheel is turned, a voltage between 1 V and approximately 1 V less than the battery voltage is displayed. |
| Motor Terminal Volt (W) | Motor terminal voltage (W phase): Min.: 0 V Max.: 98 V | Engine running and steering wheel turned | When the steering wheel is turned, a voltage between 1 V and approximately 1 V less than the battery voltage is displayed. |
| Result | Proceed to |
| When the steering wheel is turned, a voltage between 1 V and approximately 1 V less than the battery voltage is displayed. | A |
| When the steering wheel is turned, a value other than the above is displayed. | B |
|
| ||||
| A | ||
| ||