DTC C1528/12 Motor Rotation Angle Sensor Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| C1528/12 | Motor rotation angle sensor malfunction |
|

| 1.CHECK CONNECTOR CONNECTION CONDITION |
Check the installation condition of the motor rotation angle sensor connector.
| Result | Proceed to |
| NG | A |
| OK | B |
|
| ||||
| A | |
| 2.RECONFIRM DTC |
Securely connect the motor rotation angle sensor connector.
Check for DTC.
| Result | Proceed to |
| DTC is output | A |
| DTC is not output | B |
|
| ||||
| A | |
| 3.READ VALUE USING INTELLIGENT TESTER (MOTOR ROTATION ANGLE SENSOR) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and press the intelligent tester main switch ON.
Select the items "Motor Rotation Angle" in the Data List and read the value displayed on the intelligent tester.
| Tester Display | Measurement Item/Range | Normal Condition | Reference Value |
| Motor Rotation Angle | Motor Rotation Angle: Min.: 0 deg Max.: 1441.77 deg | Power steering in operation | During steering operation, motor rotation angle value changes from 0 to 360° |
|
| ||||
| OK | ||
| ||