REAR BUMPER (for Standard Body) > INSTALLATION |
| 1. INSTALL REAR UPPER BUMPER RETAINER LH |
![]() |
Attach the 2 claws to install the rear upper bumper retainer.
Install the 2 screws.
| 2. INSTALL REAR UPPER BUMPER RETAINER RH |
| 3. INSTALL REAR BUMPER SIDE SUPPORT LH |
![]() |
Attach the 2 claws to install the rear bumper side support.
Install the screw.
| 4. INSTALL REAR BUMPER SIDE SUPPORT RH |
| 5. INSTALL REAR BUMPER ARM SUPPORT REINFORCEMENT LH |
![]() |
Install the rear bumper arm support reinforcement with the 3 bolts.
| 6. INSTALL REAR BUMPER ARM SUPPORT REINFORCEMENT RH |
| 7. INSTALL REAR NO. 1 BUMPER REINFORCEMENT |
![]() |
Install the rear No. 1 bumper reinforcement with the 6 bolts.
| 8. INSTALL REAR BUMPER ENERGY ABSORBER |
![]() |
Install the rear bumper energy absorber.
| 9. INSTALL REAR BUMPER COVER |
![]() |
w/ Licence Plate Light:
Connect the licence plate light connector.
Connect the rear fog light connector.
Attach the 12 claws to install the rear bumper cover.
![]() |
w/ Rear Fender Mudguard
Install the 3 screws and 7 clips.
![]() |
w/o Rear Fender Mudguard
Install the 7 screws and 7 clips.
| 10. INSTALL REAR QUARTER PANEL MUDGUARD LH (w/ Rear Fender Mudguard) |
![]() |
w/o Outside Moulding:
Install the mudguard with the 4 screws.
![]() |
w/ Outside Moulding:
Install the mudguard with the 3 screws.
| 11. INSTALL REAR QUARTER PANEL MUDGUARD RH (w/ Rear Fender Mudguard) |