Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION RECEIVER (for HDD)

NAVIGATION RECEIVER (for HDD) > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 RADIO BRACKET


    B131480
  1. Install the No. 2 radio bracket to the radio receiver with the 4 screws.



2. INSTALL NO. 1 RADIO BRACKET


    B131479
  1. Install the No. 1 radio bracket to the radio receiver with the 4 screws.



3. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET
  1. Connect all connectors to install the navigation receiver.

  1. Insert the navigation receiver to attach the 2 claws and 4 clips on its backside.



  1. Install the 4 bolts.

    Torque:
    12.8 N*m{ 130 kgf*cm , 9 ft.*lbf }



    B219744



4. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER


B210523
  1. Connect the connector.

  1. Attach the 3 clips and 2 claws to install the cluster finish panel.



5. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER


B210524
  1. Connect the connector.

  1. Attach the 3 clips and 2 claws to install the cluster finish panel.



6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL