Home
›
RESTRAINTS
›
SUPPLEMENTAL RESTRAINT SYSTEM
›
AIRBAG CUT-OFF SWITCH
AIRBAG CUT-OFF SWITCH > INSPECTION
for Preparation
Click here
1. INSPECT AIRBAG CUT-OFF SWITCH SUB-ASSEMBLY
Measure the resistance of the switch.
Standard resistance:
Switch Condition
Tester Connection
Specified Condition
OFF
1 (PMC-) - 2 (PMC+)
80 to 120 Ω
ON
1 (PMC-) - 2 (PMC+)
320 to 480 Ω
If the result is not as specified, replace the switch sub-assembly.