Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › PTC HEATER ASSEMBLY

PTC HEATER ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT PTC HEATER ASSEMBLY


    I101090E01
  1. Measure the resistance of the PTC heater assembly.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    A-1 - B-1
    Always
    Below 1 kΩ
    A-2 - B-1
    A-2 - B-2
    A-3 - B-2

    If the result is not as specified, replace the PTC heater.