Home › BODY ELECTRICAL › OTHER SYSTEM › REAR POWER OUTLET SOCKET (for Short Body)

REAR POWER OUTLET SOCKET (for Short Body) > INSTALLATION



1. INSTALL REAR POWER OUTLET SOCKET ASSEMBLY


B133576
  1. Attach the 2 claw fittings to install the socket.



2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


B129712
  1. Install the belt hanger to the trim board.

  1. Connect the power outlet socket connector.

  1. Attach the 5 clips and 5 claws to install the trim board.

  1. Install the bolt and 2 screws.



    B137546
  1. Connect the rear No.1 seat belt's floor anchor.

    1. Connect the floor anchor with the bolt.

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    2. Install the anchor cover.



3. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET


B131615E01
  1. Align the bracket positioning hole with the claws and install the bracket with the bolt, 2 washers and collar.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



4. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER


B131613
  1. Attach the 4 claws to install the cover.



5. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL LH


6. INSTALL REAR FLOOR FINISH PLATE


    B129716
  1. Attach the 6 clips to install the finish plate.



7. INSTALL BACK DOOR WEATHERSTRIP


8. INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE


B129717
  1. Attach the 7 clips to install the side plate.

  1. Install the 4 screws.



9. INSTALL JACK CARRIER ASSEMBLY


    B129715
  1. Install the jack carrier with the 7 clips.



10. INSTALL REAR FLOOR NO. 2 BOARD


11. INSTALL REAR FLOOR NO. 3 BOARD


12. INSTALL DECK BOARD ASSEMBLY


13. INSTALL REAR FLOOR NO. 1 BOARD


14. INSTALL TONNEAU COVER ASSEMBLY


15. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY


16. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH


17. INSTALL REAR DOOR SCUFF PLATE LH


    B129711
  1. Attach the 8 claws to install the scuff plate.



18. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL