HEATER ASSEMBLY > REMOVAL |
| 1. REMOVE CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. DRAIN ENGINE COOLANT |
| 3. REMOVE EXHAUST PIPE SUB-ASSEMBLY |
Remove the 2 nuts, bolt and exhaust pipe.

| 4. REMOVE POWER HEATER ASSEMBLY |
Disconnect the connectors.
Disconnect the heater hoses.
Disconnect the fuel hose.
Remove the 2 bolts, 2 nuts and heater.

| 5. REMOVE HEATER PUMP ASSEMBLY |
Disconnect the fuel hoses.
Remove the nut and heater pump.

| 6. REMOVE WATER PIPE AND HOSE SUB-ASSEMBLY |
Disconnect the heater hoses.
Remove the nut, bolt and water pipe and hose.
