LUGGAGE ROOM LIGHT > INSTALLATION |
| 1. INSTALL BACK DOOR COURTESY LIGHT ASSEMBLY |
![]() |
Install the bulb to the light.
![]() |
Attach the 4 claws to install the light shade.
![]() |
Install the light as shown in the illustration.
| 2. INSTALL BACK DOOR TRIM BOARD |
Install the back door trim pocket with the 5 screws.
![]() |
Attach the 13 clips to install the trim board.
| 3. INSTALL BACK DOOR SIDE GARNISH RH |
| 4. INSTALL BACK DOOR SIDE GARNISH LH |
![]() |
Attach the 2 claws and 2 clips to install the garnish.
| 5. INSTALL BACK DOOR CENTER GARNISH |
![]() |
Attach the 4 claws and 4 clips to install the garnish.
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |