Home › BODY ELECTRICAL › LIGHTING › REAR FOG LIGHT ASSEMBLY

REAR FOG LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL REAR FOG LIGHT ASSEMBLY (for Back Door Attached Type)


B132932
  1. Connect the connector.

  1. Install the rear fog light with the 2 screws.



2. INSTALL REAR FOG LIGHT ASSEMBLY LH (for Bumper Attached Type)


    E123696
  1. Install the rear fog light with the 3 bolts.



3. INSTALL REAR BUMPER COVER (for Bumper Attached Type)


B208505
  1. w/ Licence Plate Light:
    Connect the licence plate light connector.

  1. Connect the rear fog light connector.

  1. Attach the 12 claws to install the rear bumper cover.

    HINT:
    The illustration only shows the LH side of the vehicle. The remaining claws are on the RH side.



    B219469
  1. w/ Rear Fender Mudguard
    Install the 3 screws and 7 clips.



    B208474
  1. w/o Rear Fender Mudguard
    Install the 7 screws and 7 clips.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL