2AD-FTV STARTING > TORQUE SPECIFICATIONS |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
| Starter assembly x Transmission housing | 64 | 652 | 47 |
| Starter wire x Terminal 30 | 9.8 | 100 | 7 |
| Starter commutator end frame assembly x Starter brush holder assembly | 3.8 | 39 | 33 in.*lbf |
| Starter commutator end frame assembly x Starter drive housing assembly | 6.0 | 61 | 53 in.*lbf |
| Starter magnetic switch assembly x Starter drive housing assembly | 7.5 | 76 | 66 in.*lbf |
| Lead wire x Terminal C | 6.5 | 66 | 57 in.*lbf |
| Battery clamp x Body : for bolt | 5.0 | 51 | 44 in.*lbf |
| Battery clamp x Front battery bracket : for nut | 5.0 | 51 | 44 in.*lbf |
| Front battery bracket x Body | 19 | 194 | 14 |
| Battery bracket reinforcement x Battery carrier bracket | 19 | 194 | 14 |
| Fuel filter assembly x Air cleaner bracket | 7.0 | 71 | 62 in.*lbf |
| Air cleaner case x Air cleaner bracket | 5.0 | 51 | 44 in.*lbf |
| No. 1 air tube x Transmission | 29 | 296 | 21 |
| Glow plug assembly x Cylinder head | 12 | 125 | 9 |
| Glow plug assembly x No. 1 glow plug connector | 2.2 | 22 | 19 in.*lbf |
| Wire harness x No. 1 glow plug connector | 4.0 | 41 | 35 in.*lbf |