Home › TRANSMISSION ยท U660F AUTOMATIC TRANSAXLE › DIFFERENTIAL CASE

DIFFERENTIAL CASE > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT DIFFERENTIAL RING GEAR


C196807E02
  1. Put matchmarks on the front differential ring gear and differential case.
    Text in Illustration 
    *1
    Matchmark



    C138532
  1. Remove the 12 bolts.



    C196808
  1. Using a plastic-faced hammer, tap on the front differential ring gear to remove it from the case.



2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING


C138534E08
  1. Using SST, remove the front differential case front tapered roller bearing from the differential case.

    SST
    09950-00020  
    09950-00030  
    09950-60010   (09951-00480)
    Text in Illustration 
    *1
    Turn
    *2
    Hold



3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING


C138535E07
  1. Using SST, remove the front differential case rear tapered roller bearing from the differential case.

    SST
    09950-00020  
    09950-00030  
    09950-60010   (09951-00480)
    Text in Illustration 
    *1
    Turn
    *2
    Hold



4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN


C138710
  1. Using a pin punch, unstake the differential case.

  1. Using a 3 mm pin punch and hammer, tap out the straight pin.

    NOTICE:
    Before removing the straight pin, unstake the differential case with a pin punch.



5. REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT


C196815
  1. Remove the front No. 1 differential pinion shaft from the differential case.



6. REMOVE DIFFERENTIAL SIDE GEAR


C196816E01
  1. Remove the 2 front differential pinions, 2 pinion thrust washers, 2 differential side gears and 2 side gear thrust washers from the differential case.



7. REMOVE FRONT TRANSAXLE CASE OIL SEAL (INNER)


C196917E02
  1. Using SST, tap out the front transaxle case oil seal from the differential case.

    SST
    09308-00010