Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › CLUTCH

CLUTCH > SERVICE DATA



Pedal height from dash panel
for LHD
175.7 - 185.7 mm (6.92 - 7.31 in.)
for RHD
210.2 - 220.2 mm (8.28 - 8.67 in.)
Clutch pedal free play
5.0 - 15.0 mm (0.197 - 0591 in.)
Clutch pedal push rod play at pedal top
1.0 - 5.0 mm (0.039 - 0.197 in.)
Clutch release point from pedal full stroke end position
25 mm (0.98 in.) or more
Clutch disc rivet head depth
Maximum
0.3 mm (0.012 in.)
Clutch disc assembly runout
Minimum
0.8 mm (0.031 in.)
Diaphragm spring finger wear
Maximum depth
0.5 mm (0.020 in.)
Maximum width
6.0 mm (0.236 in.)
Flywheel sub-assembly runout
Maximum
0.1 mm (0.004 in.)
Diaphragm spring tip non-alignment
Maximum depth
0.5 mm (0.020 in.)