Home › ENGINE ยท 2AD-FHV › COOLING › WATER PUMP

WATER PUMP > INSTALLATION

for Preparation Click here



1. INSTALL WATER PUMP ASSEMBLY
  1. Remove the adhesive from the threads of the bolt and the bolt hole of the timing chain cover.



    A196725
  1. Install a new gasket to the timing chain cover so that the protrusions indicated by the arrows in the illustration are aligned.



    A196727E01
  1. Apply adhesive to 2 or 3 threads of the bolt labeled A shown in the illustration.
    Text in Illustration 
    *1
    Adhesive

    Standard Bolt Length:
    Item
    Specified Condition
    Bolt A and C
    45 mm (1.77 in.)
    Bolt B
    30 mm (1.18 in.)

    Adhesive:
    Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



    A196785
  1. Install the water pump with the 2 bolts indicated by the arrows in the illustration.

    Torque:
    23 N*m{ 229 kgf*cm , 17 ft.*lbf }



    A196794
  1. Install the 5 bolts.

    Torque:
    23 N*m{ 229 kgf*cm , 17 ft.*lbf }



2. INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY


    A126838
  1. Install the No. 2 idler pulley and idler pulley cover plate with the bolt.

    Torque:
    40 N*m{ 408 kgf*cm , 30 ft.*lbf }



3. INSTALL ENGINE ASSEMBLY
  1. Install the engine assembly (Click here).