Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > REPAIR

for Preparation Click here


HINT:
  1. If the installation area of the headlight assembly is damaged, use the supply bracket for low-cost repair.
  2. Ensure that the headlight assembly is not damaged.



1. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER


    E137920
  1. Cut off the part shaded in the illustration and sand smooth with sandpaper.

    NOTICE:
    After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply bracket.



    E137921
  1. Install the lower headlight protector retainer with the 2 screws.