Home › ENGINE ยท 2AD-FTV › CHARGING › BATTERY CURRENT SENSOR

BATTERY CURRENT SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL BATTERY CURRENT SENSOR ASSEMBLY


    A192586E04
  1. Install the battery current sensor to the engine wire.
    Text in Illustration 
    *1
    No. 3 Engine wire

  1. Connect the connector to the battery current sensor.



    A190539E02
  1. Install the No. 3 engine wire and battery current sensor to the negative (-) battery terminal with the nut.

    Torque:
    7.6 N*m{ 77 kgf*cm , 67 in.*lbf }